Products
Every product below is one click from the home page, each with its own TDS/MSDS set.
Demulsifier Series
8 variants from light condensate to aged heavy crude dehydration. Optimized for specific crude types.
8
Formulations
500
ppm OIW
Silica Fume/Microsilica/Si Powder
Ultra-fine silica fume for high-performance concrete and special mortars, cutting permeability and boosting long-term durability.
Powder
ASTM C1240 standards
Water Reducing Superplasticizer Admixture
Water-reducing agent is a type of concrete admixture that can significantly reduce the mixing water content while maintaining the concrete’s slump.
Liquid/Powder
Forms
Calcium Stearate Water Repellent
Hydrophobic additive for mortar, gypsum and putty powders that also acts as a lubricant and release agent.
Powder
Energy-saving
Waterproof Coating
Waterproofing is non-toxic and odorless, safe for humans, excellent Waterproofing Performance, simple operation and strong adhesion.
Liquid
Waterproofing|Heat Resistance
High-Temp Non-Ionic Surfactant (SEO)
Built for ultra-deep and hot wells, SEO also adsorbs on steel to inhibit chloride corrosion while removing drilling fluid residue.
200 C
Heat Resistance
95%
Cleaning Efficiency
Modified Triazine Sulphur Scavenger
Cuts inlet H2S above 1000 ppm to below 0.1 ppm across natural gas, associated gas, LPG, naphtha, gasoline and syngas.
0.1 ppm
Outlet H2S
Linear Block Polyether Demulsifier
Delivers fast water drop and low BS&W in light crude and condensate service, applied by continuous injection or as a co-component.
Water-soluble
Formula
Polyaluminium Chloride
Polyaluminium chloride for drinking water, municipal and industrial effluent, with lower sludge yield and less pH drift than alum.
Fast Coagulation
Excellent Settling|Powder
Polyacrylamide Powder & Emulsion
PAM Polyacrylamide is widely applied in the production of various types of industrial enterprises and sewage treatment.
8-18M
Molecular Weight
ZDHC
Certified
PolyDADMAC (NSF)
Polyacrylamide is a synthetic polymer with good water solubility and the ability to form high viscosity solutions in water.
NSF
Synthetic Polymer
Water Decoloring Agent（ZDHC）
Water Decoloring Agent is for de-coloring, flocculating,CODcr decreasing.with strong decolorization (50%~99%) and removal of COD (50%~80%).
95%
Color Removal
ZDHC
Certified
Water Clarifier
Produced water de-oiling and clarification for environmentally compliant discharge.
<5
ppm OIW
99%
Removal
Oilfield Defoamer
Polyether and silicone grades for effective foam control in drilling and production.
2
Base Types
Fast
Break
H₂S Scavenger
Iron-based and triazine-based hydrogen sulfide removal for gas sweetening operations.
99%
Removal
Fast
Reaction
Filtration Control Agent
Reduces filtrate loss and improves mud cake quality in drilling operations. Compatible with various mud systems.
1060
Corrosion Inhibitor
Film-forming amine and imidazoline protection for pipelines and production equipment.
CO₂
Protection
H₂S
Resistant
Clay Stabilizer
KCl alternative for clay swelling inhibition in drilling fluids. Eco-friendly formulation.
Eco
Friendly
High
Inhibition
Dust Suppressant for Sites and Stockpiles
Polymeric crust-forming grade holds exposed soil and stockpiles for 3-6 months, hygroscopic grade suits haul roads.
3-6 mo
Dust Control
Diatomite Filler for Construction
Natural diatomaceous silica for thermal insulation products, dry-mix mortar and architectural coatings and renders.
Powder
Form
Thickening Agent for Mortar and Coatings
HPMC and HEC for water retention, ASE and HASE for sag resistance, HEUR for flow and levelling in premium emulsion paints.
Liquid/Powder
Forms
Polyethylene Glycol (PEG) Grades 200-6000
Polyethylene glycol (PEG) is a non-irritating, water-soluble polymer with good compatibility with many organic substances. It offers excellent lubricating, moisturizing, dispersing, and adhesive properties, and also serves as an antistatic agent and softener.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
Non-toxic
Non-irritating
Silicone-Free Polyether Defoamer
This product is a polyether emulsion defoamer, synthesized by a special process. It is superior to traditional non-silicon defoamers in defoaming, foam suppression and durability, and at the same time effectively avoids the shortcomings of silicone defoamer that have poor affinity and easy oil bleaching.
Silicone-free
Formula
Polyacrylamide (PAM) Construction Additive
PAM is a water- soluble high polymer.It is a kind of linear polymer with high molecular weight,low degree of hydrolysis and very strong flocculation ability.
8-12M
Molecular Weight
Dry Strength Agent for Concrete
Sodium thiocyanate accelerator supplied as powder or liquid, speeding dry strength gain without introducing chlorides.
Chloride-free
Formula
Powdered Defoamer for Mortar and Concrete
Defoamer Powder contains minimal water, it is suitable for use as a defoaming component in solid powdered products.
Powder
Convenient Storage
Silicone Oil Water Repellent Agent
Colourless silicone fluid used as a water-repellent additive and as a release agent in precast and cast-in-place concrete work.
Liquid
Clear|Colorless
Styrene Acrylic Emulsion Binder
By combining the hardness and water resistance of Styrene with the flexibility and weatherability of Acrylic, film-forming emulsion for waterproof and architectural coatings.
Liquid
Eco-Friendly
Alkyl Polyglucoside (APG) Green Surfactant
Non-toxic, low-irritation cleaner for downhole wax and heavy crude deposits where green chemistry is required.
Green
Chemistry
Fatty Alcohol Ethoxylate (AEO) Cleaner
AEO-7 and AEO-5 grades remove oily cuttings and residue, blended with SDBS for oil-based mud cleaning on offshore rigs.
Liquid
Form
Polyacrylamide for Drilling Fluids
Encapsulates drill solids to stop dispersion while building viscosity and improving solids removal and hole cleaning efficiency.
Liquid/Powder
Forms
Polyethylene Polyamine Shale Inhibitor
Drilling fluid additive that suppresses shale hydration, prevents caving and improves overall mud performance and hole stability.
Liquid
Form
Potassium Polyacrylate Clay Inhibitor
Dual-mechanism clay inhibitor for caving shale, fractured formations and high-temperature deep wells in anti-sloughing muds.
Powder
Form
PDADMAC Drilling Fluid Additive
Multi-role drilling fluid additive: clay stabiliser, flocculant and filtration control agent with additional lubricity benefits.
Liquid/Powder
Forms
Polyamine Shale Inhibitor (Drilling)
High-performance clay inhibitor for water-sensitive shale, stabilising the wellbore and preventing dispersion and hole enlargement.
Liquid
Form
Phosphorus-Free Scale Inhibitor
Water and methanol soluble antiscalant with no phosphorus load, limiting eutrophication risk in receiving water bodies.
Phosphorus-free
Formula
Composite Ca/Mg Scale Inhibitor
Water-soluble antiscalant controlling carbonate and sulphate scaling in production, injection and industrial circulating water.
Water-soluble
Formula
Non-Acidic Scale Remover for Water Systems
Water-soluble treatment for production, injection and industrial cooling systems, safer to handle than conventional acid descaling.
Non-acidic
Formula
Acrylate Pour Point Depressant
Acrylate PPD chemistry that suppresses wax deposition and keeps high-wax crude flowing at low ambient temperatures.
Liquid
Form
Emulsion Type PPD & Wax Inhibitor
Emulsion delivery of proven PPD and wax inhibitor chemistry for high-wax crude in field gathering and refinery pipelines.
Liquid
Form
Fluorocarbon Ester PPD & Wax Inhibitor
Lowers pour point and blocks wax crystal growth in field and refinery service, aromatic-soluble by continuous or downhole dosing.
Liquid
Form
Inorganic Oxygen Scavenger (Seawater)
Removes dissolved oxygen to prevent oxidative corrosion, used on its own or combined with vacuum deaeration towers.
Liquid
Form
Zinc Oxide & Iron Oxide Sulphur Scavenger
Water and methanol soluble scavenger applied as a spray or direct liquid injection, with static mixers improving contact efficiency.
1000 ppm
Inlet H2S
Gas-Liquid Two-Phase Corrosion Inhibitor
Film-forming inhibitor for gas gathering and processing where both phases contact steel, soluble in water and ethanol.
Water-soluble
Formula
Heterocyclic Gas Corrosion Inhibitor
Water and alcohol soluble inhibitor for natural gas systems, applied continuously to protect pipelines, tubing and vessels.
Water-soluble
Formula
Emulsion Type Defoamer for Aqueous Systems
Emulsion-type antifoam for aqueous process streams, easy to meter and disperse with standard chemical dosing equipment.
Liquid
Form
Oil-based Silicone Defoamer for Gas
Prevents gas lock and vessel overflow caused by foam in gathering and degassing, and dissolves readily in aromatic solvents.
Liquid
Form
Oil-based Modified Silicone Defoamer
Water-dispersible silicone antifoam delivering long-lasting foam control across industrial water and environmental treatment.
Liquid
Form
Polyether-based Defoamer (Seawater)
Knocks down foam where silicone antifoams are unsuitable, including seawater injection, produced water and cooling loops.
Silicone-free
Formula
Inorganic-Organic Composite Clarifier
Composite clarification aid for heavy crude production, soluble in aromatic solvents and applied by continuous injection.
Liquid
Form
Polyamine Clarifier for Produced Water
Water-soluble polyamine that flocculates residual oil and suspended solids in late-life field water treatment systems.
Water-soluble
Formula
Thiocarbamate-based Water Clarifier
Water-soluble clarification chemistry for mature field produced water, improving oil removal and water disposal quality.
Water-soluble
Formula
Cationic Copolymer Water Clarifier
Acrylamide cationic copolymer for produced water de-oiling where water cut is above 70% and retention time is under 30 minutes.
30 min
Retention Time
Polyacrylate Emulsion Reverse Demulsifier
Water-soluble polyacrylate emulsion breaker for offshore fields with over 70% water cut and under 30 minutes of retention time.
70%
Water Cut
Water-in-Water Reverse Demulsifier
Acrylamide cationic copolymer that breaks oil-in-water emulsions where water cut exceeds 70% or oil and solids loading is high.
>70%
Water Cut
Polyether Modified Composite Demulsifier
Polyether-modified composite that strips dispersed oil from produced water in heavy oil fields by continuous injection.
Water-soluble
Formula
Multi-block Polyether (Aged Crude)
Intermittent-dosed chemistry that releases tightly held water from aged, high-density crude and long-stored slop oil.
Liquid
Form
Phenol-Amine Resin Polyether Demulsifier
Wide application window covering heavy crude and polymer-bearing produced fluids, soluble in ethanol and diesel for easy dosing.
Liquid
Form
Phenolic Resin Polyether Demulsifier
Breaks asphaltene-stabilised emulsions by continuous injection in production, or batch dosing for cargo and slop oil treatment.
Liquid
Form
Ethyleneamine Comb Polyether Demulsifier
Water-soluble comb polyether that resolves waxy crude emulsions and releases clean, dry oil at reduced demulsifier dosage.
Water-soluble
Formula
Demulsifier for Oily Wastewater
Water-soluble demulsifier that separates emulsified oil for recovery or disposal, easing the load on downstream treatment.
Water-soluble
Formula
Heavy Metal Capture Agent for Effluent
Chelating precipitants for electroplating, PCB and smelting effluent, polishing residual heavy metals to meet discharge limits.
Liquid
Form
Defoaming Agent for Wastewater Treatment
Knocks down existing foam and prevents re-foaming in aeration basins, cooling loops and high-shear process streams.
Silicone-free
Formula
Polyamine
Polyamine is liquid cationic polymers of different molecular weight which work efficiently as primary coagulants and charge neutralization agents in liquid-solid separation processes in a wide variety of industries.
High Pressure Resistance
Good Water Solubility|Stable Properties
DADMAC Cationic Monomer for Polymers
Diallyl dimethyl ammonium chloride supplied for in-house polymerisation of cationic coagulants, thickeners and conditioners.
Liquid
Form